98% Buyer satisfaction Rating
Premium Waterproof & Fire-Resistant Blackout Roller Shades for Showers & Wet Zones
$85.00
$150.00
Unit price
/
Unavailable
43% off
Video
98% Buyer satisfaction Rating
Premium Waterproof & Fire-Resistant Blackout Roller Shades for Showers & Wet Zones
$85.00
$150.00
Unit price
/
Unavailable
Your custom-made shades are estimated to ship in 4 ~ 5 business days
Buy More, Save More
| Spend | Save |
|---|---|
| $450+ | $35 off |
| $750+ | $100 off |
| $1,100+ | $130 off |
| $1,500+ | $210 off |
Extra savings are automatically applied at checkout
Free shipping with delivery in 3–7 business days
Buy directly from the manufacturer
Dedicated customer support based in North America
Replacement guarantee for quality or delivery issues within 30 days
Any question? Feel free to contact us: (877) 930-2299 or
support@senseblinds.com
How to Measure
Let's make sure an inside mount will work for your window!
Using a metal tape measure, first check if you have sufficient depth:
Measure inside the window opening from the back of the window to the front of the opening where the shade would mount. A minimum inside-mount depth of 2" is required for all three top-treatment options.
For a fully flush inside mount, the required depth is:
- Aluminum Valance: 3 3/4"
- Fabric Insert Cassette: 3"
- Exposed Roll: 2 5/8"
A fully flush mount means the selected top treatment is completely recessed within the window opening. If your window does not have sufficient depth, the shade may still be suitable for a partially recessed inside mount, or you may choose an outside mount instead.
How to Measure:
Let's start with the Width:
- Measure the inside width of the window opening from left to right at the top of the opening to the nearest 1/8". If rounding is necessary, round down to the nearest 1/8". That is your ordering width.
Now, let's do the Height:
- Measure the inside height of the window opening from the top of the opening to the bottom of the opening or sill to the nearest 1/8" in three places: on the left-hand side, the middle, and on the right-hand side. Write down all 3 measurements and circle the tallest. That is your ordering height.
Note: Always provide us with the actual measurement of the window opening. We will make the necessary deduction of approximately 3/16" to the width of the top of the shade to accommodate the installation brackets.
No deductions will be made to the ordered height.
Video: How to Measure for Inside Mount
Before you start measuring, decide where above your window opening you want to mount your shade. The minimum flat vertical mounting space depends on your selected top treatment:
- Aluminum Valance: 3 1/8"
- Fabric Insert Cassette: 3 3/16"
- Exposed Roll: 2 3/16"
Follow the instructions below based on where you plan to install your shade.
If you do not have sufficient vertical space for mounting the brackets, please see our inside mount instructions or consider a different product.
Your ordered width will be the "tip to tip" measurement, which is the widest part of the top of the shade including the brackets and cassette valance (if applicable). If you wish to have the fabric cover a specific width, we recommend ordering slightly wider — just ensure that you have enough horizontal space to mount the shade.
Above the Window (No Trim) ›
Width:
Looking at your window and surrounding wall, decide what area you would like to cover. We recommend the shade extends about 2-4" on each side of the window opening for the best light control and appearance.
Using a metal tape measure, measure from left to right, including your desired extra space on each side of the window. That is your ordering width.
Height:
Consider how far above the window you would like to install your shade but at least starting with the minimum vertical space referenced above. Since the shade spools onto the roll, it does not need to be installed high above the window to have the shade fabric fully clear the window.
Measure from the top of where you will mount the shade on the wall down to where you want the bottom of the shade to be, using the same extra space below your window opening as you used above; if you have a protruding windowsill, measure down to the top of the sill. That is your ordering height.
Above the Trim ›
Width:
Looking at your window and surrounding wall, decide what area you would like to cover. We recommend the shade extends about 2-3" on either side of the window opening for the best light control and appearance.
Using a metal tape measure, measure from left to right, including any desired extra space on each side of the window. That is your ordering width.
Height:
Consider how far above the window you would like to install your shade but at least starting with the minimum vertical space referenced above. Since the shade spools onto the roll, it does not need to be installed high above the window to have the shade fabric fully clear the window.
Measure from the top of where you will mount the shade on the wall down to where you want the bottom of the shade to be, using the same extra space below your window opening as you used above, or to the bottom edge of the trim if you prefer; if you have a protruding windowsill, measure down to the top of the sill. That is your ordering height.
Note: The shade fabric may rub against the trim when operating. If your trim is more than 1/2" thick, consider adding shims (not included) under the brackets for additional clearance. If your trim is 3/4" or thicker, we recommend using an extended slotted bracket.
On the Trim ›
Width:
We don't normally recommend mounting roller shades directly on the trim unless your window configuration doesn't allow for other placements. Your ordered width will be the bracket-to-bracket measurement, which cannot exceed the width of your trim. However, the fabric portion of roller shades is always narrower than the ordered width, and will not extend to the edges of the trim.
Confirm that the height of your trim is at least the minimum height required for installing the mounting brackets. At the top of your window, use a steel measuring tape and measure from outer edge to outer edge of the trim. That is your ordering width.
Note that the fabric portion of the shade will be narrower than your ordered width.
Height:
Measure from the top of your trim to the bottom of your trim or to the top of the windowsill if you have a protruding sill. That is your ordering height.
Door Mount ›
Width:
Using a metal tape measure, measure left to right from the outside edge of the trim piece that goes around the glass to the other outside edge. That is your ordering width. However, if you have space, it is best to order the shade about 2-4" wider for better light control.
Height:
Consider how far above the window trim piece you would like to install your shade but at least starting with the minimum vertical space referenced above. Measure down to where you want the bottom of the shade to be, using the same extra space below the window trim piece as you used above. That is your ordering height.
Video: How to Measure for Outside Mount
How to Install
Let’s get ready to install your inside mount shades
Before you begin, make sure you have everything you need for a smooth and secure installation.
What’s included in the box:
- Shades
- Installation brackets
- Mounting screws
- Safety tension device
- Remote control (if applicable)
- Charging cable (if applicable)
What you’ll need:
- Rechargeable drill (with 1/4" drill bit)
- Phillips screwdriver
- Pencil
- Tape measure
- Ladder (if needed)
Important: Do not remove the protective paper wrapping from the fabric until the shade is fully installed. Removing it too early may cause the fabric to shift or affect alignment.
Once everything is prepared, follow the step-by-step installation instructions in the guides below.
Download Guides
Video: Inside Mount Installation
Let’s get ready to install your outside mount shades
Before you begin, make sure you have everything you need for a smooth and secure installation.
What’s included in the box:
- Shades
- Installation brackets
- Mounting screws
- Safety tension device
- Remote control (if applicable)
- Charging cable (if applicable)
What you’ll need:
- Rechargeable drill (with 1/4" drill bit)
- Phillips screwdriver
- Pencil
- Tape measure
- Ladder (if needed)
Important: Do not remove the protective paper wrapping from the fabric until the shade is fully installed. Removing it too early may cause the fabric to shift or affect alignment.
Once everything is prepared, follow the step-by-step installation instructions in the guides below.
Download Guides
Video: Outside Mount Installation
Recommendations and Limitations
Important Notes & Motorization Details
Please review the following information carefully before purchase.
Important Notes
- There may be a ±1/8" measurement variance. Please do not deduct measurements when ordering.
- For outside-mounted shades with exposed rollers, the mounting brackets will remain visible.
- If multiple shades are installed in the same room, please indicate this to ensure consistent fabric alignment.
- Fabric color may vary slightly between dye lots. To ensure consistency, order all shades for the same room together.
Additional Information
- The back of the waterproof fabric is the same color as the front, as it does not have a coated backing.
- Safety devices must be installed to prevent the formation of hanging loops.
- The beaded chain color is matched to the selected cassette or valance color.
- Fabric-insert cassettes use matching fabric, with a coordinated bottom rail.
- Aluminum cassettes are available in multiple colors, with matching bottom rails.
Motorization Details
- Each motorized shade requires at least one remote control.
- One remote can operate multiple shades, with each channel controlling a single unit.
- The operating range is approximately 260 ft in open space.
Specifications
Aluminum Valance Specifications
Mounting Requirements
| Outside Mount Flat Space Required | 3 1/8" |
|---|---|
| Min Depth for Inside Mount | 2" |
| Depth Required for Flush Mount | 3 3/4" |
Product Size Limits
| Specification | Beaded Chain | Cordless | Motorized |
|---|---|---|---|
| Minimum Width | 14" | 15" | 20" |
| Maximum Width | 103" | 78" | 96" |
| Minimum Height | 12" | 12" | 18" |
| Maximum Height | 120" | 105" | 120" |
Light Gaps
| Chain Side | 1/2" |
|---|---|
| Opposite Side | 3/16" |
Fabric Insert Cassette Specifications
Mounting Requirements
| Outside Mount Flat Space Required | 3 3/16" |
|---|---|
| Min Depth for Inside Mount | 2" |
| Depth Required for Flush Mount | 3" |
Product Size Limits
| Specification | Beaded Chain | Cordless | Motorized |
|---|---|---|---|
| Minimum Width | 14" | 15" | 20" |
| Maximum Width | 103" | 78" | 96" |
| Minimum Height | 12" | 12" | 18" |
| Maximum Height | 120" | 105" | 120" |
Light Gaps
| Chain Side | 1/2" |
|---|---|
| Opposite Side | 3/16" |
Exposed Roll Specifications
Mounting Requirements
| Outside Mount Flat Space Required | 2 3/16" |
|---|---|
| Min Depth for Inside Mount | 2" |
| Depth Required for Flush Mount | 2 5/8" |
Product Size Limits
| Specification | Beaded Chain | Cordless | Motorized |
|---|---|---|---|
| Minimum Width | 14" | — | 20" |
| Maximum Width | 103" | — | 96" |
| Minimum Height | 12" | — | 18" |
| Maximum Height | 120" | — | 120" |
Light Gaps
| Chain Side | 1/2" |
|---|---|
| Opposite Side | 3/16" |
Shipping & Return
- Enjoy free shipping on product orders within the continental United States & Canada.
- The sample shipping fee of $3.99 is fully refundable when you place a blinds order. To receive the refund, place a window covering order within 30 days of your sample order and include your sample order ID in the "Special Instructions" section during checkout.
- Each is custom-made to your exact specifications and generally ships within 3 to 5 business days after your order is placed.
- We hold all orders for 24 hours before processing to allow time for any adjustments to measurements or color choices.
- Please note that shipping may take an additional 3 to 7 business days.
- For customized shades, and blinds, we usually will not accept returns. Click to see more return policy
5-Year Warranty
Built for Long-Term Reliability
At Sense Blinds, we stand behind the quality of our products with a 5-Year Warranty. If there are any issues with parts or components during this period, we’ll send you a brand-new replacement. For more information about our warranty,click here.
Certified Quality & Safety
GREENGUARD Certified
Tested for low chemical emissions to support healthier indoor environments.
OEKO-TEX® Standard 100
Tested for harmful substances to ensure safer everyday use.
REACH Compliant
Meets strict requirements for restricted substances and chemical safety.
SGS Tested
Independently tested for fabric quality and performance.
NFPA 701:2021
Fire-retardant fabric tested according to NFPA 701:2021.
Waterproof Roller Shades Built for Wet Areas
Designed for bathrooms, shower windows, and other high-humidity spaces, Premium Waterproof Roller Shades feature a durable 60% PVC + 40% fiberglass fabric engineered for long-lasting performance. The waterproof surface resists moisture absorption, while the blackout construction provides reliable privacy and helps create a clean, low-maintenance window solution.
Unlike standard moisture-resistant fabrics, Premium Waterproof Roller Shades are built for demanding wet environments where frequent splashes and condensation are common, making them suitable for windows installed inside or near shower areas.
UV Protection
Fade Resistant
Waterproof Surface
Blackout Privacy
Easy Maintenance
5-Year Warranty
Choose How You Want to Operate
Cordless Lift
Clean, minimal operation with no visible cords for a safer and more modern look.
Continuous Cord Loop
Smooth chain-operated control, ideal for larger shades and precise positioning.
Motorized with Remote
Adjust your shades with one touch for added convenience and a cleaner cordless finish.
Features
Aluminum Valance
Sleek aluminum headrail with a clean, modern finish. Available in five color options, with the bottom rail color matched to your selected valance for a cohesive and well-finished look.
Fabric Insert Cassette
A cassette valance conceals the roller tube at the top of the window, while a fabric insert covers the face of the cassette for a clean and finished appearance.
Aluminum Bottom Rail
The bottom rail color is matched to the selected aluminum cassette, creating a clean, coordinated look from top to bottom.
Chain Safety Fixing Device
Designed to secure the bead chain to the wall for safer everyday use in homes with children or pets.
Choose the Right Lift Option for Your Needs
| Lift Option | Best For | Key Benefits |
|---|---|---|
|
Chain Lift
|
Large or heavy shades
|
Most stable and durable, easy to control
|
|
Cordless
|
Homes with children or pets, shorter-height windows
|
Clean look, safer and easy to operate
|
|
Motorized (Remote)
|
Large windows or hard-to-reach areas
|
Effortless control, smooth and quiet operation
|
|
Smart Hub
|
Smart homes
|
App control, scheduling, and automation
|
Premium Waterproof & Fire-Resistant Blackout Roller Shades for Showers & Wet Zones
White-01
Why Add Motorization?
Our battery motorized shades offers a smooth, quiet, and cordless lifting experience. Equipped with a built-in rechargeable battery, a single 6-hour charge provides up to 6 months of usage. Each unit includes a 3-meter USB charging cable for convenient and flexible recharging.
