98% Buyer satisfaction Rating
Blackout Top Down Bottom Up Cellular Shades – Cordless & Motorized, 3/8" & 5/8" Single Cell, 99% Light Block, Noise Reduction, Energy Efficient for Bedroom, Nursery & Home Theater
$65.00
$120.00
Unit price
/
Unavailable
46% off
Video
98% Buyer satisfaction Rating
Blackout Top Down Bottom Up Cellular Shades – Cordless & Motorized, 3/8" & 5/8" Single Cell, 99% Light Block, Noise Reduction, Energy Efficient for Bedroom, Nursery & Home Theater
$65.00
$120.00
Unit price
/
Unavailable
Your custom-made shades are estimated to ship in 4 ~ 5 business days
Buy More, Save More
| Spend | Save |
|---|---|
| $450+ | $35 off |
| $750+ | $100 off |
| $1,100+ | $130 off |
| $1,500+ | $210 off |
Extra savings are automatically applied at checkout
Free shipping with delivery in 3–7 business days
Buy directly from the manufacturer
Dedicated customer support based in North America
Replacement guarantee for quality or delivery issues within 30 days
Any question? Feel free to contact us: (877) 930-2299 or
support@senseblinds.com
How to Measure
Let’s make sure an inside mount will work for your cellular shades!
Using a metal tape measure, first check your inside mounting depth. Depth is measured from the window glass/back of the opening to the front edge where the brackets will sit.
See Specifications for the minimum inside-mount depth and flush-mount depth required for your selected configuration.
If your depth is not sufficient, please use our outside mount instructions. If space is limited, extension brackets can be purchased separately for installation.
How to Measure:
Let’s start with the Width:
- Measure inside of the window opening/frame from left to right to the nearest 1/8" at three places: at the top of the opening, the middle of the opening, and then the bottom of the opening. Write down all 3 measurements and circle the narrowest. If rounding is necessary, round down to the nearest 1/8". That is your ordering width.
Now, let’s do the Height:
- Measure from the top inside of the opening to the bottom sill to the nearest 1/8" in three places: left, middle, and right. Write down all 3 and circle the tallest. That is your ordering height.
Note: Always provide the actual window opening measurements. For inside mounts, we may make a small deduction to help ensure smooth operation and bracket clearance.
Video: How to Measure for Inside Mount
Before you start, decide where you want to mount your cellular shades (above the opening, above the trim, on the trim, or on a door). You’ll need a flat surface for the brackets.
See Specifications for the minimum flat mounting
surface required for your selected configuration.
If space is limited, extension brackets can be purchased
separately for installation.
Your ordered width is typically the widest part of the headrail/cassette (tip-to-tip). For the best light control and appearance, we recommend ordering wider than the glass/opening.
Above the Window (No Trim) ›
Width:
Decide how much coverage you want around the opening. We recommend extending the shade 2"–4" on each side for better light control.
Measure left to right including your desired extra space — that is your ordering width.
Height:
Measure from where the top of the shade will be mounted down to where you want the bottom of the shade to reach. If you have a protruding sill, measure to the top of the sill (or to your preferred stopping point). That is your ordering height.
Above the Trim ›
Width:
We recommend extending the shade 2"–3" past each side of the window opening for a cleaner look and improved light control.
Measure left to right including the extra space — that is your ordering width.
Height:
Measure from where the top will be mounted down to your desired bottom point. If you prefer, you can measure to the bottom of the trim; for protruding sills, measure to the top of the sill. That is your ordering height.
Note: If your trim is thick and you need extra clearance, use shims or consider extension brackets.
On The Trim ›
Width:
We don't normally recommend mounting cellular shades directly on the trim unless your window configuration doesn't allow for other placements. Your ordering width must fit within your trim width.
Measure outer edge to outer edge of the trim at the top — that is your ordering width.
Height:
Measure from the top of the trim to the bottom of the trim (or to the top of the sill if you have a protruding sill). That is your ordering height.
Door Mount ›
Width:
Measure left to right from the outside edge of the glass trim to the other outside edge. If space allows, order the shade 2"–4" wider for better light control.
Height:
Measure from where you want the top mounted down to where you want the bottom of the shade to stop. That is your ordering height.
Video: How to Measure for Outside Mount
How to Install
Video: Inside Mount Installation
Let’s get ready to install your inside-mount cellular shades
Before you begin, make sure you have everything you need for a smooth and secure installation.
What’s included in the box:
- Your custom cellular shade
- Installation brackets and mounting hardware
- Any additional accessories required for your selected lift option
What you’ll need:
- Rechargeable drill
- Phillips screwdriver
- Pencil
- Tape measure
- Ladder (if needed)
Once everything is prepared, follow the step-by-step instructions in the installation guide that matches your selected configuration.
Installation Guides
For Dual Motorized Shades
After installation, use the setup guides below for motor, remote, and smart-control setup.
Video: Outside Mount Installation
Let’s get ready to install your outside-mount cellular shades
Before you begin, make sure you have everything you need for a smooth and secure installation.
What’s included in the box:
- Your custom cellular shade
- Installation brackets and mounting hardware
- Any additional accessories required for your selected lift option
What you’ll need:
- Rechargeable drill
- Phillips screwdriver
- Pencil
- Tape measure
- Ladder (if needed)
Once everything is prepared, follow the step-by-step instructions in the installation guide that matches your selected configuration.
Installation Guides
For Dual Motorized Shades
After installation, use the setup guides below for motor, remote, and smart-control setup.
Recommendations and Limitations
Important Notes
- Manufacturing tolerances may vary by approximately ±1/8". Please enter your exact window measurements and do not make your own deductions. Any required factory deductions will be applied during production.
Cassette & Operating System
- Different fabric cell sizes and lift options may use different headrail or cassette configurations.
- Please review the Specifications before ordering to confirm the headrail/cassette dimensions, minimum inside-mount depth, and flush-mount depth required for your selected configuration.
- If you are unsure whether your selected configuration will fit your window, please email us before placing your order.
Motorized Options
Motorized Top Down Bottom Up Cellular Shades use a dual-motor system. One motor controls the upper moving rail, while the second motor controls the lower rail. The two rails can be operated independently or moved at the same time, giving you flexible control over light, privacy, and shade position.
Two motor options are available: Basic Remote Motor and Matter over Thread Motor. Both motor options can be paired with a compatible remote control. Remote controls are sold separately.
Basic Remote Motor
- Uses a dual-motor system controlled by a compatible remote control.
- The upper and lower rails can be controlled independently or operated together as needed.
- Does not support app or smart-home control.
Matter Motor
- Uses Matter over Thread for smart-home integration.
- Compatible with Apple Home, Google Home, Amazon Alexa, and SmartThings.
- A compatible Matter Controller / Thread Border Router is required. Many common smart-home devices already provide this function, including selected Apple TV, HomePod, Echo, Nest Hub, Nest Wifi Pro, and SmartThings Hub/Station models.
- No separate SenseBlinds or Tuya hub is required when your existing smart-home system already includes a compatible Matter/Thread device.
Remote Control
- Remote controls are sold separately.
- Before shipment, our factory will pair and configure the remote control with your motorized shade(s), so it will be ready to use when your order arrives.
- The remote allows the upper and lower rails to be operated independently or together.
- If you order one motorized shade, we will default to the single-channel version of the same remote style.
- If you are ordering multiple motorized shades, you do not need to purchase a separate remote for every shade.
- If multiple shades are installed in the same room, they can be paired with the same multi-channel remote and controlled individually or together.
- Please indicate in the Order Notes which rooms or shades you would like grouped on the same remote, or email us after placing your order.
Rechargeable Battery & Charging
- Motorized Top Down Bottom Up Cellular Shades use a rechargeable lithium battery system integrated into the headrail.
- A full charge typically provides approximately 6 months of use, depending on operating frequency and shade size.
- A 3-meter charging cable is included.
- Charging requires a standard 5V/2A USB power adapter; the wall adapter is not included.
- We do not recommend leaving the motor continuously connected to power, as this may reduce battery lifespan.
Optional Solar Panel
For high or hard-to-reach windows that receive consistent sunlight, an optional solar panel can help maintain the battery charge and reduce manual recharging. Performance may vary depending on sunlight, window orientation, season, and installation conditions.
Specifications
3/8" Single Cell — Cordless ›
Cordless Shade
- Minimum Width: 19"
- Maximum Width: 78"
- Minimum Height: 20"
- Maximum Height: 90"
Mounting Requirements
- Minimum Inside Depth: 1"
- Depth Required for Flush Mount: 1 11/16"
Minimum Outside Mount
- Wall Surface: 1 3/4"
- If space is limited, extension brackets can be purchased separately for installation.
Light Gap
- Fabric to Headrail Edge: Approx. 1 mm (≈ 3/64") per side
3/8" Single Cell — Dual Cord ›
Dual Cord Shade
- Minimum Width: 32"
- Maximum Width: 103"
- Minimum Height: 20"
- Maximum Height: 120"
Mounting Requirements
- Minimum Inside Depth: 1"
- Depth Required for Flush Mount: 2"
Minimum Outside Mount
- Wall Surface: 1 3/4"
- If space is limited, extension brackets can be purchased separately for installation.
Light Gap
- Fabric to Headrail Edge: Approx. 1 mm (≈ 3/64") per side
3/8" Single Cell — Dual Motorized ›
Dual Motorized Shade
- Minimum Width: 32"
- Maximum Width: 103"
- Minimum Height: 20"
- Maximum Height: 120"
Mounting Requirements
- Minimum Inside Depth: 1 3/16"
- Depth Required for Flush Mount: 2 1/8"
Minimum Outside Mount
- Wall Surface: 1 7/16"
- If space is limited, extension brackets can be purchased separately for installation.
Light Gap
- Fabric to Headrail Edge: Approx. 1 mm (≈ 3/64") per side
5/8" Single Cell — Cordless ›
Cordless Shade
- Minimum Width: 19"
- Maximum Width: 78"
- Minimum Height: 20"
- Maximum Height: 90"
Mounting Requirements
- Minimum Inside Depth: 1 3/16"
- Depth Required for Flush Mount: 2 1/8"
Minimum Outside Mount
- Wall Surface: 1 7/16"
- If space is limited, extension brackets can be purchased separately for installation.
Light Gap
- Fabric to Headrail Edge: Approx. 1 mm (≈ 3/64") per side
5/8" Single Cell — Dual Cord ›
Dual Cord Shade
- Minimum Width: 32"
- Maximum Width: 103"
- Minimum Height: 20"
- Maximum Height: 120"
Mounting Requirements
- Minimum Inside Depth: 1 3/16"
- Depth Required for Flush Mount: 2 1/8"
Minimum Outside Mount
- Wall Surface: 1 7/16"
- If space is limited, extension brackets can be purchased separately for installation.
Light Gap
- Fabric to Headrail Edge: Approx. 1 mm (≈ 3/64") per side
5/8" Single Cell — Dual Motorized ›
Dual Motorized Shade
- Minimum Width: 32"
- Maximum Width: 103"
- Minimum Height: 20"
- Maximum Height: 120"
Mounting Requirements
- Minimum Inside Depth: 1 3/16"
- Depth Required for Flush Mount: 2 1/8"
Minimum Outside Mount
- Wall Surface: 1 7/16"
- If space is limited, extension brackets can be purchased separately for installation.
Light Gap
- Fabric to Headrail Edge: Approx. 1 mm (≈ 3/64") per side
Shipping & Return
- Enjoy free shipping on product orders within the continental United States & Canada.
- The sample shipping fee of $3.99 is fully refundable when you place a blinds order. To receive the refund, place a window covering order within 30 days of your sample order and include your sample order ID in the "Special Instructions" section during checkout.
- Each is custom-made to your exact specifications and generally ships within 3 to 5 business days after your order is placed.
- We hold all orders for 24 hours before processing to allow time for any adjustments to measurements or color choices.
- Please note that shipping may take an additional 3 to 7 business days.
- For customized shades, and blinds, we usually will not accept returns. Click to see more return policy
5-Year Warranty
Built for Long-Term Reliability
At Sense Blinds, we stand behind the quality of our products with a 5-Year Warranty. If there are any issues with parts or components during this period, we’ll send you a brand-new replacement. For more information about our warranty,click here.
ECO & Sustainable
PFAS-Free
Our fabrics are free of PFAS chemicals, ensuring safer indoor air quality and reduced environmental impact.
Non-Toxic Materials
Certified under OEKO-TEX Standard 100 to ensure fabrics are safe for everyday indoor use.
REACH Compliant
Meets EU REACH regulations for restricted substances and chemical safety.
UV Protection
SGS-tested UV protection blocks up to 99.9% of harmful rays, helping preserve interior furnishings and reduce sun fading.
Color Fastness
Tested for excellent color retention, helping fabrics maintain their color after prolonged sun exposure and regular cleaning.
Blackout Top Down Bottom Up Cellular Shades
Dark When You Need It. Daylight When You Want It.
Enjoy natural light during the day and a darker, more private room when fully closed. Lower the shade from the top, raise it from the bottom, or position both rails exactly where you want them.
The blackout cellular fabric blocks incoming light through the fabric, while the honeycomb construction helps reduce heat transfer for improved insulation and year-round energy efficiency.
UV Protection
Energy Saving
Noise Reduction
Smooth & Quiet Lift
Easy Maintenance
5-Year Warranty
Privacy Where You Need It. Light Where You Want It.
Lower from the Top
Daylight Above. Privacy Below.
Lower the shade from the top to let natural light in while
keeping the lower portion covered with blackout fabric.
Raise from the Bottom
Open the View Below.
Raise the shade from the bottom like a traditional cellular
shade whenever you want a more open window.
Adjust Both Rails
Position Privacy Exactly Where You Need It.
Move both rails to position the blackout fabric in the middle
of the window while leaving open space above and below.
Designed for Darker, More Private Spaces
Bedrooms
Stronger light control and privacy for rest and everyday comfort.
Nurseries
Create a darker daytime environment for naps and quiet time.
Media Rooms
Reduce incoming sunlight and glare for a more comfortable viewing setup.
Daytime Sleep
Block daylight through the fabric when your sleep schedule follows a different rhythm.
Blackout Performance Designed for Better Sleep & Privacy
Designed with blackout fabric and a minimal side gap to provide stronger room darkening, privacy, and everyday comfort.
100% Light-Blocking Fabric
The blackout fabric blocks incoming light through the material, helping create a darker and more private indoor environment.
Approx. 1 mm Side Gap
The cellular shade fabric sits approximately 1 mm (≈ 3/64") from the headrail edge per side, helping minimize visible side gaps for stronger blackout performance.
Choose How You Want to Control Your Shade
Cordless
Simple manual control with clean, direct operation.
Dual Cord
Independent cord controls for flexible top and bottom positioning.
Dual Motorized
Powered control in both directions for convenient everyday adjustment.
Choose the Cellular Profile You Prefer
Choose between 3/8" and 5/8" single-cell profiles based on the look and scale you prefer.
A Closer Look at the Details
See how each lift system is designed for flexible Top Down Bottom Up operation.
Cordless System
Use built-in handles to adjust the shade by hand. Handle and hardware details may vary between the 3/8" and 5/8" Single Cell configurations.
Dual Cord System
One cord on each side of the headrail independently controls the upper and bottom rails for flexible Top Down Bottom Up adjustment.
Dual Motorized System
Two motors independently control the upper and bottom rails, or move both rails together. The motors and rechargeable batteries are integrated inside the headrail.
Designed for a Worry-Free Setup
Reinforced Protective Packaging
Thick bubble cushioning and reinforced materials help reduce
transit damage and support safe delivery.
Labeled Bracket Positions
Clear labels indicate recommended bracket positions for faster,
more accurate installation.
Everything Included
Your motorized shade comes with the necessary components
for installation and operation.
Blackout Top Down Bottom Up Cellular Shades – Cordless & Motorized, 3/8" & 5/8" Single Cell, 99% Light Block, Noise Reduction, Energy Efficient for Bedroom, Nursery & Home Theater
3/8" / Pure White-B001
Why Add Motorization?
Our battery motorized shades offers a smooth, quiet, and cordless lifting experience. Equipped with a built-in rechargeable battery, a single 6-hour charge provides up to 6 months of usage. Each unit includes a 3-meter USB charging cable for convenient and flexible recharging.
