RecessFit Inside Mount Sheer Shades

Inside mounting is the gold standard for a tailored, built-in appearance. The shade sits entirely within the window recess, flanked by trim, creating a clean, integrated look that emphasizes the architecture rather than the hardware. Our RecessFit inside mount sheer shades are precision-cut to ⅛-inch accuracy, ensuring a perfect fit left-to-right and front-to-back. We account for recess irregularities—if your window is slightly out of square, we cut the shade to the narrowest width and include adhesive-backed nylon shims to center it. Brackets are designed to be as unobtrusive as possible, mounted to the top of the recess and hidden behind the headrail. The result is a shade that appears to float within the opening, with minimal light gap and maximum sightline purity. Available on all 2-inch and 2.5-inch vane sheer fabrics, with your choice of cordless wand tilt, continuous cord loop, or motorized operation. Because the window itself becomes the frame.

View all

⅛‑Inch Precision Cutting

Most custom shade manufacturers cut to ¼‑inch accuracy, which can leave visible gaps or force installers to “eyeball” the fit. Our RecessFit system uses CNC‑controlled cutting stations that measure and cut each component to ±0.125 inches. For critical installations, we offer precision trimming to ±1/16 inch. Your order confirmation includes a detailed diagram showing exact width, drop, and bracket placement.

Minimum Recess Depth Requirements

Inside‑mount sheer shades require adequate recess depth to house the headrail and operating mechanism. Our standard headrail requires 2 inches of depth. For shallow recesses, we offer a slim‑line headrail requiring only 1.5 inches (compatible with cordless wand tilt only; not available with continuous cord loop or motorization). Our online ordering system automatically verifies your recess depth against your hardware selection.

Bracket Concealment

Standard inside‑mount brackets are often visible from the front, interrupting the clean line of the recess. RecessFit brackets use a low‑profile “L” design that mounts to the top of the recess, with the vertical leg hidden behind the headrail. Once installed, the brackets disappear entirely—only the sheer fabric, vanes, and bottom rail remain visible.

Snap‑In Installation

RecessFit brackets use a two‑part system: a metal base plate that screws into the top of the recess, and a snap‑in mounting tab attached to the headrail. The shade clicks into place without tools and can be removed instantly for cleaning or maintenance. All screw heads are concealed behind the shade for a seamless finish.

Light Gap Management

Even with precision cutting, inside‑mount shades may show a small edge gap—typically about ¼ inch on each side. For clients requiring zero light leakage, we offer side channel kits that mount to the window jambs and block peripheral light. Available in matching finishes, these are ideal for bedrooms and media rooms.

Custom Returns for Odd Recesses

If your window recess is not perfectly rectangular—curved, angled, or irregular—we can fabricate a custom return that matches the exact contour. This requires a detailed template, and our customer service team will guide you through the process. Additional charges apply.